KDF Home In-Line Products Services Parts Process Materials
About KDF
Cluster
Thin Film Notes
Pre-Owned Products
News
Events
Worldwide Locations
Contact KDF

KDF Electronics

10 Volvo Drive

Rockleigh, New Jersey 07647

Tel: (201) 784-5005

Fax: (201) 784-0202

 

 

- 600 Series

- 744

- 844

- 900 Series

- Opus Robot C to C

- 8600i

- Original Batch OEM

- Repair Services

- Training

- Buying From KDF

- KDF Upgrade Kit

- KDF Spare Parts

- Sputtering Cathodes

- Sputtering Targets

- Backing Plates

- Sputtering Targets

- Backing Plates

- Bonding

 
 
 

KDF News

Back to News

Highly Uniform Dielectric Films Using a Combined Linear Scanning, Velocity Profiling and Planetary Rotating Motion

2002

 
Exceptionally high uniformities and tight repeatabilities have been achieved for dielectric films on KDF 900 series sputtering tools using a proprietary ERPP™ (enhanced rotating planetary pallet) in conjunction with the tool's standard linear scanning mode. We have developed reactive and non-reactive processes for materials such as SiO2, Si3N4, TiO2 and Al2O3, with uniformities better than +/- 1% over the pallet and repeatabilities of better than +/-0.5% from pallet to pallet. This performance enables us to provide production processes for multilayer dielectric mirrors and filters to the optoelectronics and display industry, as well as high quality silicon nitride passivation layers and antireflective coatings for compound semiconductors and solar cells. Specific reactive and non-reactive processes are discussed in depth. Additionally, a new system capability that allows the scan velocity to be programmed flexibly is discussed with respect to its potential for further uniformity improvement.
 
(Ref: Vacuum Technology and Coating, December 2002).
 
Related Article:
Highly uniform dielectric films using a combined linear scanning, velocity profiling and planetary rotating motion
 
By S. Gupta, A. Ruspini and M. Fregeau, KDF Electronics and Vacuum Services

December 2002, Vacuum Technology & Coating article

 

###

 
ABOUT KDF
KDF Electronic & Vacuum Services, Inc., produces batch in-line sputtering tools in a wide variety of R&D and production formats for the mainstream silicon, emerging materials and flat-panel display markets. KDF systems are used in the production of semiconductors, photomasks, telecommunications networks, wireless circuits, gallium arsenide (GaAs), high density interconnect, sensors, optoelectronics, flat panel display and radio frequency power devices. KDF is located in Rockleigh, New Jersey, and has representatives in Europe, Japan, Taiwan, Singapore, Malaysia, China and Korea.
 
  
COMPANY CONTACTS:

Kurt Flechsig
President
Tel: +1 (201) 784-5005
e-mail: kurt@loomisgroup.com 

Todd Plaisted
Director of Sales and Marketing
Tel: +1 (201) 784-5005
e-mail: todd@kdf.com



AGENCY CONTACTS:

Marlene Berrios
Loomis Group
Tel: +1 (617) 638-0022
e-mail: berriosm@loomisgroup.com

Charla Jones
Loomis Group
Tel: +1 (617) 638- 0022
e-mail: charla@loomisgroup.com
 

 
Home   about KDF    in-line products    services    parts    process materials    thinfilm technology
pre-owned products    events    news    worldwide locations    contact/directions    trademarks & technology   legal
 
   KDF Electronic & Vacuum Services Inc.   All rights reserved.   Copyright 2008©